pu光油-PU啞油-PU清漆
PU varnish - Pu dull oil - PU varnish
【理化參數】
[physical and chemical parameters]
【包裝規格】
1套包含油漆3.5KG,稀釋劑3KG，固化劑1KG
開油比例：（光油：固化劑：稀釋劑）3：1：3；烤65-70度，30分鐘
【主要組成】
由特殊羥基丙烯酸樹脂、助劑、溶劑精制而成。以A、B兩組分裝。
【產品說明】
本品具有流平性好的施工性特點，制品表面，光澤高，豐滿度好，硬度高，優異的附著力，抗污染和耐化學性。耐黃變性好，固含高，薄涂就可以得到很好的光澤。
【使用范圍】
用于各種電動工具外殼、電腦外殼、電腦鼠標殼、手提式影音器材、CD機、照相機、電吹風外殼、運動器材、麥克風、剃須刀、手電筒外殼、電話、望遠鏡等塑料或金屬制品、陶瓷、PLOY等工藝產品的底漆上的罩光。
[package specification]
One set contains 3.5kg paint, 3kg diluent and 1kg curing agent
Oil ratio: (varnish: curing agent: diluent) 3:1:3; Bake at 65-70 degrees for 30 minutes
[main components]
It is refined by special hydroxyl acrylic resin, auxiliary agent and solvent. They are packed in two groups A and B.
[product description]
This product has the construction characteristics of good leveling, high gloss, good fullness, high hardness, excellent adhesion, anti pollution and chemical resistance. Good yellowing resistance, high solid content, thin coating can get good luster.
[application scope]
It is used for covering the primer of plastic or metal products such as electric tool shell, computer shell, computer mouse shell, portable audio-visual equipment, CD player, camera, hair dryer shell, sports equipment, microphone, razor, flashlight shell, telephone, telescope, ceramics, ploy and other process products.
【施工工藝】
1.在噴涂前充分清洗底材,以確保優異的附著力和表面效果。
2.本品作業條件,溫度: 15-30℃;濕度:(RH)≤75%
3.配套固化劑:PU-002 配套開油水：PU-605
4.開油比例: A組:B組:C組(油:固化劑:開油水)=3:1:3-4
5.噴涂粘度(巖田2號,25℃) : 8-11s
6.干燥條件: 65-70℃×30min(可自干)
7.噴涂空氣壓力: 4.5-6.5kg/c㎡
8.噴涂距離：10-20cm
9.噴槍口徑：1.1-1.5mm
[construction technology]
1. Fully clean the substrate before spraying to ensure excellent adhesion and surface effect.
2. Operating conditions: 15-30 ℃; Humidity: (RH) ≤ 75%
3. Supporting curing agent: pu-002, supporting oil and water: pu-605
4. Oil ratio: group A: group B: Group C (oil: curing agent: oil) = 3:1:3-4
5. Spray viscosity (Yantian 2, 25 ℃): 8-11s
6. Drying condition: 65-70 ℃ × 30min (self drying)
7. Spraying air pressure: 4.5-6.5kg/cm2
8. Spraying distance: 10-20cm
9. Diameter of spray gun: 1.1-1.5mm
【施工注意事項】
1：濕度大于85%，或陰雨天施工請少量添加防白水。
2：被涂物表面油脂、灰塵、清除干凈，水分烘干。
3：避免與不同系列產品混用,以免影響附著力及其它物性
4:油漆開稀后放置5分鐘再噴涂
5:噴好后不可馬上干燥,烘烤溫度不可過高,以免燒焦底材
6:油漆調稀時用專用稀釋劑以免影響漆膜外觀及性能
7:開蓋使用后務必蓋緊,以免吸濕或風干
[construction precautions]
1: If the humidity is higher than 85%, or in rainy days, please add a small amount of anti white water.
2: The grease and dust on the surface of the coating shall be removed, and the moisture shall be dried.
3: Avoid mixing with different series of products, so as not to affect the adhesion and other physical properties
4: Leave the paint for 5 minutes before spraying
5: Do not dry immediately after spraying, and the baking temperature should not be too high to avoid scorching the substrate
6: When thinning the paint, use special thinner to avoid affecting the appearance and performance of the paint film
7: Be sure to cover tightly after use to avoid moisture absorption or air drying
包裝規格：
5KG膠桶，20KG鐵桶，配套稀釋劑20KG藍膠桶
Package specification:
5kg rubber barrel, 20kg iron barrel, 20kg blue rubber barrel with diluent
致誠科技根據產品特性匹配最佳的鍍膜工藝方案，
致誠鍍膜優勢特點所在：專業、誠信、極致可靠。
Zhicheng Technology matches the best coating process scheme according to the product characteristics,
Zhicheng coating advantages: professional, honest, extremely reliable.
納米噴鍍 納米噴鍍材料 納米噴鍍?cè)O(shè)備 納米噴鍍加工 納米噴鍍廠家 納米噴鍍?cè)?/span> 納米噴鍍加工廠家 納米噴鍍配方 納米噴鍍技術 納米噴鍍工藝
納米噴涂 納米噴涂材料 納米噴涂設備 納米噴涂加工 納米噴涂廠家 納米噴涂原料 納米噴涂加工廠家 納米噴涂配方 納米噴涂技術 納米噴涂工藝
銀鏡噴鍍 銀鏡噴鍍材料 銀鏡噴鍍?cè)O(shè)備 銀鏡噴鍍加工 銀鏡噴鍍廠家 銀鏡噴鍍?cè)?/span> 銀鏡噴鍍加工廠家 銀鏡噴鍍配方 銀鏡噴鍍技術 銀鏡噴鍍工藝
銀鏡噴涂 銀鏡噴涂材料 銀鏡噴涂設備 銀鏡噴涂加工 銀鏡噴涂廠家 銀鏡噴涂原料 銀鏡噴涂加工廠家 銀鏡噴涂配方 銀鏡噴涂技術 銀鏡噴涂工藝
納米電鍍 納米電鍍材料 納米電鍍?cè)O(shè)備 納米電鍍加工 納米電鍍廠家 納米電鍍?cè)?/span> 納米電鍍加工廠家 納米電鍍配方 納米電鍍技術 納米電鍍工藝
環保電鍍 環保電鍍材料 環保電鍍?cè)O(shè)備 環保電鍍加工 環保電鍍廠家 環保電鍍?cè)?/span> 環保電鍍加工廠家 小型電鍍?cè)O(shè)備 環保電鍍技術 環保電鍍工藝
